Likas na Gas Generator
Abstract
Ang natural gas generator set ay isang power generation device na gumagamit ng gaseous fuel bilang pinagmumulan ng kuryente at kino-convert ang thermal power ng isang ignition engine. Nilagyan ng cooling, lubrication, fuel supply, control, power output, parallel at chassis system, ito ay isang kumpletong power output device na maaaring tumanggap ng low-pressure at high-pressure na gas fuel.
TONTEK POWER nature gas generator ay may mahusay at matibay na makina, ang maaasahang generator, ay maaaring maging synchronization at parallel at ultra low noise control. Piliin ang natural na gas engine control system ng dayuhan at domestic sikat na brand, matagumpay na nagsagawa ng teknikal na pananaliksik sa thermal efficiency conversion, lean combustion, at supercharger control ng mga gas engine. Kung ikukumpara sa mga katulad na produkto, mayroon itong mga katangian ng maliit na sukat at magaan ang timbang, mataas na kaligtasan, mataas na pagiging maaasahan, mataas na thermal efficiency, mataas na pagganap ng gastos at ganap na awtomatikong pamamahala ng operasyon. Ito ay angkop para sa isang pangunahing pinagmumulan ng kuryente o isang standby na pinagmumulan ng kuryente. Ito ay isang matatag, environment friendly at matipid na power supply equipment.
Pangunahing Tampok
● Pinili ang mga de-kalidad na bahagi mula sa mga nangungunang internasyonal na tagagawa, na may mataas na pagiging maaasahan at perpektong pagganap.
●Bilang malinis na mapagkukunan ng enerhiya, hindi ito nangangailangan ng purification, walang ganap na pagkasunog at walang polusyon.
● Modular na disenyo ng istraktura, maaaring mabilis na mai-install at magamit.
● Magandang start-up performance at mataas na start-up success rate.
● Ang gastos sa pagpapanatili ay mababa at ang ikot ng pagkukumpuni ay mahaba.
● Complete unit brand, malawak na power coverage
●Intelligent parallel machine control system ay maaaring mapagtanto parallel operation ng maramihang mga unit upang matugunan ang power demand ng malaking load.
● Mataas na pagiging maaasahan at mababang gastos sa ikot ng buhay.
● Mahusay at Makakapaligiran na Teknolohiya sa Paggamit ng Enerhiya.
● Ligtas at maaasahang ipinamahagi na enerhiya.
● Makatao ang disenyo at matalinong kontrol
● Awtomatikong operating system na may touch screen
● Maaaring mabawasan ng berdeng enerhiya ang mga gastos, mababang ingay, advanced at sunod sa moda na disenyo
| Modelo | Na-rate na Kapangyarihan | Modelo ng Engine | Bilis ng Pag-ikot | Bilang ng mga Silindro | Pag-alis | Alternator | sukat | Timbang | |
| KW | KVA | 190 at 300 | RPM | & Uri | (L) | Siemens Marathon o Equal | (L*W*H)(mm) | (kg) | |
| EJ-250NB | 250 | 313 | 6190ZLT | 1000/1200 | 6.L | 35.7 | 1FC6 Serye | 4950*1760*2200 | 8750 |
| EJ-300N | 300 | 375 | JC-15T(6140ZLT) | 1500/1800 | 6.L | 15 | 1FC6 Serye | 3620*1270*1654 | 3300 |
| EJ-320NB | 320 | 400 | G8V190ZLD | 1000/1200 | 8.Vee | 47.6 | 1FC6 Serye | 4566*2040*2200 | 10700 |
| •EJ-400NB | 400 | 500 | 12V190DT | 1000/1200 | 12.Vee | 71.5 | 1FC6 Serye | 11500 | |
| EJ-450NB | 450 | 563 | 12V190ZDT | 1000/1200 | 12.Vee | 71.5 | 1FC6 Serye | 4790*2040*2212 | 11800 |
| *EJ-500N | 500 | 625 | 12V190ZDT | 1000/1200 | 12.Vee | 71.5 | 1FC6 Serye | 12000 | |
| EJ-500N | 500 | 625 | 12V190ZDT-2 | 1000/1200 | 12.Vee | 71.5 | 1FC6 Serye | ||
| EJ-600N | 600 | 750 | 12V190ZDT-2 | 1200 | 12.Vee | 71.5 | 1FC6 Serye | ||
| EJ-500B | 500 | 625 | G12V190ZLDT | 1000/1200 | 12.Vee | 71.5 | 1FC6 Serye | 5260*2040*2500 | 12800 |
| •EZ-500NB | 500 | 625 | 6300D/T | 600/600 | 6.L | 161 | 1FC6 Serye | 6400*1600*2900 | 22000 |
| EJ-600NB | 600 | 750 | G12V190ZLDT | 1000/1200 | 12.Vee | 71.5 | 1FC6 Serye | 5260*2040*2500 | 12600 |
| •EZ-600NB | 600 | 750 | 8300D/T-1 | 500/500 | 8.L | 215 | 1FC6 Serye | 6400*1600*2900 | 22000 |
| EJ-700N | 700 | 875 | G12V190ZLDT | 1000/1200 | 12.Vee | 71.5 | 1FC6 Serye | 5260*2040*2500 | 12800 |
| •EZ-700NB | 700 | 875 | 8300D/T-2 | 600/600 | 8.L | 215 | 1FC6 Serye | 6400*1600*2900 | 22000 |
| EJ-800NB | 800 | 1000 | H16V190ZLT | 1000/1200 | 16.Vee | 97.53 | 1FC6 Serye | 6070*2380*2776 | |
| EJ-1000NB | 1000 | 1250 | H16V190ZLT | 1000/1200 | 16.Vee | 97.53 | 1FC6 Serye | ||
| EZ-1000NB | 1000 | 1250 | 8300ZLD/T-1 | 600/600 | 8.L | 215 | 1FC6 Serye | 6400*1600*3100 | 25000 |
| EJ-1100N | 1100 | 1375 | H16V190ZLT | 1000/1200 | 16.Vee | 97.53 | 1FC6 Serye | 6070*2380*2776 | 22000 |
| EJ-1200N | 1200 | 1500 | H16V190ZLT | 1200 | 16.Vee | 97.53 | 1FC6 Serye | ||
| EJ-1500N | 1500 | 1875 | H16V190ZLT | 1200 | 16.Vee | 97.53 | 1FC6 Serye | ||
| Modelo | Na-rate na Kapangyarihan | makina | Bore*Stroke | Pag-alis | Bilang ng mga Silindro | Paraan ng Air Intake | Dimensyon | Timbang | |
| KW | KVA | Modelo | (mm) | (L) | & Uri | (L*W*H)(mm) | (kg) | ||
| ED-50NB | 50 | 63 | TBD226B | 105*130 | 6.8 | 6.L | Natural | 2320*980*1450 | 1050 |
| ED-60NB | 60 | 75 | TBD226B | 105*130 | 6.8 | 6.L | Natural | 2320*980*1450 | 1100 |
| EST-80NB | 80 | 100 | WD615 | 126*130 | 9.8 | 6.L | Natural | 2700*980*1680 | 1900 |
| ED-80NB | 80 | 100 | TBD226B | 105*130 | 6.8 | 6.L | Turbo | 2550*1100*1450 | 1250 |
| EST-100NB | 100 | 125 | WD615 | 126*130 | 11.6 | 6.L | Natural | 2750*1080*1680 | 2100 |
| ED-100NB | 100 | 125 | BF6M1015 | 132*145 | 11.9 | 6.Vee | Natural | 2350*1200*1750 | 1650 |
| EST-120NB | 120 | 150 | WD615 | 126*130 | 9.8 | 6.L | Turbo | 2850*1100*1680 | 2250 |
| ED-120NB | 120 | 150 | BF6M1015 | 132*145 | 11.9 | 6.Vee | Natural | 2450*1200*1750 | 1780 |
| EST-150NB | 150 | 188 | WD618 | 126*155 | 11.6 | 6.L | Turbo | 3050*1100*1800 | 2210 |
| ED-150NB | 150 | 188 | BF6M1015 | 132*145 | 11.9 | 6.Vee | Turbo | 2600*1250*1750 | 2150 |
| EST-200NB | 200 | 250 | WD618 | 126*155 | 11.6 | 6.L | Turbo | 3050*1100*1800 | 2320 |
| ED-200NB | 200 | 250 | BF6M1015 | 132*145 | 11.9 | 6.Vee | Turbo | 2650*1460*1880 | 2250 |
| ED-250NB | 250 | 313 | BF8M1015 | 132*145 | 15.9 | 8.Vee | Turbo | 3000*1550*1950 | 2650 |
| ED-280N | 280 | 350 | BF8M1015 | 132*145 | 15.9 | 8.Vee | Turbo | 3000*1550*1950 | 2650 |
| ED-400N | 400 | 500 | TBG620L6 | 170*195 | 26.56 | 6.L | Turbo | 3850*1350*2280 | 7500 |
| ED-500N | 500 | 625 | TBG620V8 | 170*195 | 35.4 | 8.Vee | Turbo | 4050*1500*2480 | 8800 |
| ED-600N | 600 | 750 | TBG620V8 | 170*195 | 35.4 | 8.Vee | Turbo | 4050*1500*2480 | 8800 |
| ED-800N | 800 | 1000 | TBG620V12 | 170*195 | 53.1 | 12.Vee | Turbo | 4700*1800*2650 | 10050 |
| ED-1000N | 1000 | 1250 | TBG620V16 | 170*195 | 70.8 | 12.Vee | Turbo | 5500*1800*2650 | 12600 |
| ED-1200N | 1200 | 1500 | TBG620V16 | 170*195 | 70.8 | 16.Vee | Turbo | 5500*1800*2650 | 12600 |
| Modelo | COP | Modelo ng Engine | Lakas ng Engine | Alternator | Configuration | Elec. Eff. | Init Eff. | Tot. Eff | sukat | Timbang |
| KW | LALAKI | KW | Leroy Somer | (L*W*H)(mm) | (KG) | |||||
| o Pantay | ||||||||||
| EM-50N5 | 50 | E0834E302 | 54 | Serye ng LSA | L4 | 36.50% | 53.50% | 90% | 2800*1050*1550 | 1600 |
| EM-66N5 | 66 | TBA | 72 | Serye ng LSA | L4 | 38.40% | 53.10% | 91.50% | 1900 | |
| EM-75N5 | 75 | TBA | 80 | Serye ng LSA | L4 | 36.80% | 52.20% | 90% | 3250*1100*1650 | 2000 |
| EM-100N5 | 100 | E0836LE302 | 110 | Serye ng LSA | L6 | 36.80% | 49.60% | 86.40% | 3700*1150*1750 | 2200 |
| EM-150N5 | 150 | E2876E312 | 150 | Serye ng LSA | L6 | 38.83% | 52.80% | 91.10% | 4000*1225*1875 | 3300 |
| EM-200N5 | 200 | E2876LE302 | 210 | Serye ng LSA | L6 | 37.20% | 48.90% | 86.10% | 4300*1300*2000 | 4400 |
| EM-220N5 | 220 | E2676LE202 | 220 | Serye ng LSA | L6 | 43.40% | 46.80% | 90.20% | 4400 | |
| EM-250N5 | 250 | E2848LE322 | 265 | Serye ng LSA | V8 | 36.80% | 48.70% | 85.50% | 4600 | |
| EM-270N5 | 270 | E3262E302 | 275 | Serye ng LSA | V12 | 39.60% | 54% | 93.60% | 4600 | |
| EM-350N5 | 350 | E3268LE212 | 370 | Serye ng LSA | V8 | 41.90% | 52.50% | 94.40% | 5200*1600*2100 | 5700 |
| EM-400N5 | 400 | E2842LE322 | 420 | Serye ng LSA | V12 | 38.60% | 44.40% | 83% | 5200*2000*2100 | 6400 |
| EM-450N5 | 450 | E3262E302 | 500 | Serye ng LSA | V12 | 42.10% | 49.30% | 91.40% | 5300*2000*2100 | 6900 |
| EM-520N5 | 520 | E3262LE202 | 550 | Serye ng LSA | V12 | 38.80% | 48.30% | 87.10% | 5500*2000*2100 | 7500 |
| ·EP-875N5 | 875 | 4016-61TRS1 | 912 | Serye ng LSA | V16 | 38.20% | 44.80% | 83% | 7000*2000*2200 | 13500 |
| ·EP-1000N5 | 1000 | 4016-61TRS2 | 1042 | Serye ng LSA | V16 | 38.70% | 42.20% | 80.90% | 18000 |
| Modelo | COP | Modelo ng Engine | makina | Alternator | Configuration | Elec. Eff. | Init Eff. | Tot. Eff. | Dimensyon | Timbang |
| kapangyarihan | ||||||||||
| KW | LALAKI | KW | Leroy Somer o Kapantay | (L*W*H)(mm) | (kg) | |||||
| EM-60N6 | 60 | E0834E302 | 62 | Serye ng LSA | L4 | 35.30% | 53.50% | 88.80% | 2800*1050*1550 | 1900 |
| EM-66N6 | 66 | E0834LE302 | 68 | Serye ng LSA | L4 | 37.60% | 51.90% | 89.50% | 2800*1050*1550 | 1900 |
| EM-85N6 | 85 | E0836LE302 | 85 | Serye ng LSA | L6 | 37% | 53.60% | 90.60% | 3550*1100*1650 | 2100 |
| EM-100N6 | 100 | E0836LE202 | 110 | Serye ng LSA | L6 | 33.70% | 50.80% | 84.50% | 3700*1150*1750 | 2200 |
| EM-150N6 | 150 | E2876E302 | 170 | Serye ng LSA | L6 | 38% | 54.10% | 92.10% | 4000*1225*1875 | 3300 |
| EM-200N6 | 200 | E2876LE302 | 210 | Serye ng LSA | L6 | 35.30% | 50.80% | 86.10% | 4300*1300*2000 | 4400 |
| EM-250N6 | 250 | E2676LE202 | 250 | Serye ng LSA | L6 | 39.40% | 49.10% | 88.50% | 4300*1300*2000 | 4600 |
| EM-280N6 | 280 | E2848LE322 | 295 | Serye ng LSA | V8 | 36.10% | 49.50% | 85.60% | 4300*1300*2000 | 4600 |
| EM-300N6 | 300 | E3262E302 | 300 | Serye ng LSA | V12 | 38.70% | 54.90% | 93.60% | 4500*1400*2000 | 4960 |
| EM-390N6 | 390 | E3268LE212 | 390 | Serye ng LSA | V8 | 40.20% | 47.70% | 87.70% | 5200*2000*2100 | 6400 |
| EM-420N6 | 420 | E3262LE232 | 450 | Serye ng LSA | V12 | 38.40% | 52.30% | 90.70% | 5400*2000*2100 | 6500 |
| EM-560N6 | 560 | E3262LE202 | 580 | Serye ng LSA | V12 | 38.20% | 49.90% | 88.10% | 5500*2000*2100 | 7500 |
| ·EP-960N6 | 960 | 4016-61TRS1 | 980 | Serye ng LSA | V16 | 38.20% | 44.80% | 83% | 7000*2000*2200 | 13500 |
| ·EP-1100N6 | 1100 | 4016-61TRS2 | 1210 | Serye ng LSA | V16 | 38.70% | 42.20% | 80.90% | 7000*2200*2400 | 18000 |
| Modelo | COP | makina | Bore*Stroke | Lumipat | Ratation | Elec. | Therm. | Kabuuan | Sa pangkalahatan | Timbang |
| ment | Bilis | Eff. | Eff. | Eff. | sukat | |||||
| (KW) | Modelo | (mm) | (L) | (rpm) | (%) | (%) | (%) | (L*W*H)(mm) | (kg) | |
| EMW-400N5 | 400 | TCG2016V08C / | 132*160 | 17.5 | 1500 | 42.3 | 45.2 | 87.5 | 3090*1490*2190 | 5340 |
| CG132-8 | ||||||||||
| EMW-600N5 | 600 | TCG2016V12C / | 132*160 | 26.3 | 1500 | 42 | 45.8 | 87.8 | 3690*1490*2190 | 7000 |
| CG132-12 | ||||||||||
| EMW-800N5 | 800 | TCG2016V16C / | 132*160 | 35 | 1500 | 42.5 | 45.3 | 87.8 | 4090*1590*2190 | 8450 |
| CG132-16 | ||||||||||
| EMW-1000N5 | 1000 | •TCG2020V12K1 / | 170*195 | 53.1 | 1500 | 40 | 47 | 87 | 4660*1810*2210 | 11200 |
| CG170-12 | ||||||||||
| EMW-1125N5 | 1125 | •TCG2020V12K / | 170*195 | 53.1 | 1500 | 40.9 | 45.6 | 86.5 | 4790*1810*2210 | 11700 |
| CG170-12 | ||||||||||
| EMW-1200N5 | 1200 | ♦TCG2020V12 / | 170*195 | 53.1 | 1500 | 43.6 | 43.3 | 86.9 | 4790*1810*2210 | 11700 |
| CG170-12 | ||||||||||
| EMW-1500N5 | 1500 | •TCG2020V16K / | 170*195 | 70.8 | 1500 | 40.9 | 45.7 | 86.6 | 5430*1810*2210 | 13320 |
| CG170-16 | ||||||||||
| EMW-1560N5 | 1560 | ♦TCG2020V16 / | 170*195 | 70.8 | 1500 | 43.2 | 43.8 | 87 | 5430*1810*2210 | 13320 |
| CG170-20 | ||||||||||
| EMW-2000N5 | 2000 | ♦TCG2020V20 / | 170*195 | 88.5 | 1500 | 43.7 | 43.2 | 86.9 | 6200*1710*2190 | 17900 |
| CG170-20 | ||||||||||
| EMW-3333N5 | 3333 | TCG2032V12 / | 260*320 | 203.9 | 1000 | 43.9 | 42.6 | 86.5 | 7860*2660*3390 | 43100 |
| CG260-12 | ||||||||||
| EMW-4300N5 | 4300 | TCG2032V16 / | 260*320 | 271.8 | 1000 | 44.1 | 42,.7 | 86.8 | 9200*2690*3390 | 51200 |
| CG260-16 | ||||||||||
| EMW-4500N5 | 4500 | TCG2032BV16 / | 260*320 | 271.8 | 1000 | 44.6 | 42.2 | 86.8 | 9200*2690*3390 | 51400 |
| CG260-16 |
| Modelo | COP | makina | Bore*Stroke | Lumipat | Ratation | Elec. | Therm. E | Kabuuan | Dimensyon | Timbang |
| ment | Bilis | Eff. | ff. | Eff. | ||||||
| (KW) | Modelo | (mm) | (L) | (rpm) | (%) | (%) | (%) | (L*W*H)(mm) | (kg) | |
| EMW-400N6 | 400 | TCG2016V08C / | 132*160 | 17.5 | 1800 | 41.4 | 46 | 87.4 | 3170*1490*2190 | 5120 |
| CG132-8 | ||||||||||
| EMW-600N6 | 600 | TCG2016V12C / | 132*160 | 26.3 | 1800 | 41.3 | 46.5 | 87.8 | 3770*1490*2190 | 6260 |
| CG132-12 | ||||||||||
| EMW-800N6 | 800 | TCG2016V16C / | 132*160 | 35 | 1800 | 41.6 | 46.3 | 87.9 | 4130*1490*2190 | 6780 |
| CG132-16 | ||||||||||
| EMW-1125N6 | 1125 | •TCG2020V12K / | 170*195 | 53.1 | 1500 | 40.7 | 45.6 | 86.3 | 5970*1790*2210 | 12850 |
| CG170-12 | ||||||||||
| EMW-1200N6 | 1200 | ♦TCG2020V12 / | 170*195 | 53.1 | 1500 | 43.4 | 43.2 | 86.6 | 5970*1790*2210 | 12850 |
| CG170-12 | ||||||||||
| EMW-1500N6 | 1500 | •TCG2020V16K / | 170*195 | 70.8 | 1500 | 40.6 | 45.7 | 86.3 | 6640*1790*2210 | 14850 |
| CG170-16 | ||||||||||
| EMW-1560N6 | 1560 | ♦TCG2020V16 / | 170*195 | 70.8 | 1500 | 43 | 43.7 | 86.7 | 6640*1790*2210 | 14850 |
| CG170-16 | ||||||||||
| EMW-2000N6 | 2000 | ♦TCG2020V20 / | 170*195 | 88.5 | 1500 | 43.4 | 43.2 | 86.6 | 7470*1710*2190 | 19400 |
| CG170-20 | ||||||||||
| EMW-3000N6 | 3000 | TCG2032V12 / | 260*320 | 203.9 | 900 | 43.9 | 42.1 | 86 | 8000*2660*3390 | 40650 |
| CG260-12 | ||||||||||
| EMW-4000N6 | 4000 | TCG2032V16 / | 260*320 | 271.8 | 900 | 43.8 | 42.2 | 86 | 9420*2690*3390 | 53300 |
| CG260-16 | ||||||||||
| EMW-4050N6 | 4050 | TCG2032BV16 / | 260*320 | 271.8 | 900 | 44.3 | 41.8 | 86.1 | 9420*2690*3390 | 53300 |
| CG260-16 |
